We usually blame the national power grid without even checking for bad wiring in our homes. It may be outdated and inefficient in providing electricity to appliances, electronics and lighting. The problem is that the circuits installed in earlier times were not designed to power the various types of electronic equipment or lighting of this era. There can be clear signs of stress with more power strips and a single outlet paving the way for sprouting power strips or stealth invisible at the back of ceilings, walls and overlays. Thus, when considering household electrical appliances, your safety is the main goal. If you’re facing high bills, flickering lights, and damaged appliances in your home, you may want to make sure your home circuit isn’t in proper working order. Maintenance company Dubai will help you with all kinds of electrical issues. Because electrical maintenance companies in Dubai exactly know what kinds of problems can be with electrician services.
Here are some common electrical wiring problems and their solutions.
Electric jumps.
This can happen due to poor house wiring, lightning strikes, faulty appliances, or damaged power lines. Waves are common and last for a microsecond, but if you experience frequent surges, it causes damage to the equipment, which especially reduces life expectancy.
Check the device that connects to your home network or wiring, and try unplugging low-quality power cards or devices from the outlet. If the spikes don’t recur, your problem is solved. If this is not the case, you should call an electrician.
Overload.
Sometimes your lighting fixture has a light bulb or other fixture with more power than intended. This is a code violation and the level of risk is quite high. The heat from the lamp can melt the socket and the insulation present in the appliance wires. This results in sparks from one wire to another and causes electrical fires. Even after removing the lamp, the socket and wires will still be damaged.
It is always best to install a light bulb or any other fixture while staying within the power limits. If the luminaires are not labeled with wattage, it is advisable to use a 60W bulb or even less.
Powerful subsidence and current dips.
Dip dips usually occur when the power knob is faulty and electrical appliances are connected to it. This also happens when the mesh is made from poor-quality materials. In this case, it consumes more power when turned on.
Open junction box
The junction box (detailed tips on the website: emi.su) has many wires that are connected to each other. If it is not closed, the person also receives a blow from the damaged wire. This is a violation of the rules, and although the risk is minimal if the wires are out of reach. Therefore, it is better to close it with the provided screws.
The light switches don’t work.
You can easily point out if it’s poor workmanship or substandard products with light switches that don’t work on the correct lighting setting. It could also be faulty wiring, circuit, or outlet. You can consult an electrician on this matter.
Flickering light.
You may have experienced frayed wiring when it’s windy outside, causing short circuits as cables move. This is not a code violation, but a higher level of risk as it can suddenly start a fire. Call an electrician immediately to replace the damaged wiring.
Shutdown switch.
When other items with high energy consumption are used before connecting the microwave or hair dryer, there is a chance that they will turn off. The trip is actually a sign that your home is protected. Just check what is causing the trip and try to use a low value, also the usage can be limited to one circuit.
Few connection points.
Nowadays, most homes have power strips and extension cords that rely heavily on them. Unless you are using heavy-duty extension cords, such as 14 gauge or thicker, the risk is minimal.
Therefore, it is advisable to use more sockets with the help of an electrician.
Electric shock.
When electricity is not used properly, it results in electric shock with an unpleasant experience. The likelihood of such electrical problems in older homes was quite high because the circuits were installed in the old days. Electric shock occurs when the device is turned on or off. The problem may be related to the device or wiring. To check the problem, you can check with another device. But to be on the safe side, just talk to your electrician to get the issues resolved.
