Netgear guest access network is one of the great options for those users who want to keep their WiFi range extender away and secure from on-going potential threats. The guest access network feature stops you from sharing your admin password from every third person. But, what if the feature doesn’t work in a proper manner? Need not to worry! This piece of writing can help! Check the fixes listed in this post and know how to fix guest access network not working issue within minutes.
Let’s dive in!
Fix: Netgear Guest Access Not Working
No matter which Netgear extender model you are using, the troubleshooting tips given in this article will remain the same for fixing Netgear guest access network not working issue.
Let’s dig a little deeper!
Fix 1: Restart the Extender
A minor technical glitch in your Netgear WiFi range extender can stop you from accessing the guest access feature. To get the issue fixed, restart your Netgear WiFi range extender. The restart process can easily be initiated by following the instructions provided below:
Step 1: First things first, disconnect all the devices that are currently connected to Netgear_Ext SSID.
Step 2: Then, unplug the Netgear extender from the wall socket.
Step 3: Wait for a couple of minutes.
Step 4: Plug the Netgear extender back in.
Step 5: Wait! Do not proceed. Let the power LED on the Netgear extender become green and stable.
Step 6: As soon as you see that the device LED isn’t blinking, connect your WiF-enabled devices to Netgear_Ext SSID.
Once you’re done, try accessing the guest access network again and see if the power cycle/ restart process worked for you or not.
Fix 2: Update the Firmware
If you have updated the firmware of your Netgear WiFi range extender to the most recent version and you are facing issues while accessing the guest access network, then chances are you haven’t downloaded the correct firmware file as per your extender model. Confirm the same! And, if the case is with you, then bear in mind that the guest access network feature will not work for you.
To get the issue fixed, all you have to do is to access the mywifiext setup page and download the correct firmware version for your Netgear extender as per the availability of your device model. The firmware of your WiFi range extender can also be updated via its manual or visiting the official site of Netgear.
If you are not aware of the Netgear extender firmware update process, then we suggest you – do not do it on your own. Downloading incorrect or wrong firmware version for your Netgear extender may affect the performance of the device and damage its hardware as well.
For instructions on how to download Netgear extender firmware, drop us a line into the comments section.
Fix 3: Enable the Feature
Make sure that you have enabled the guest access network feature. Confirm the same by heading towards the extender’s settings page using 192.168.1.250 IP.
Here’s how to get the job done:
Launch a web browser of your choice on a PC or laptop.
Head towards the address bar.
Type www.mywifiext.net or 192.168.1.250 IP without typos.
Input the Netgear extender login credentials.
Click Log In and you will be redirected to the basic home screen of your Netgear extender.
Select Guest Network and follow the on-screen instructions.
Note: You can also enable the guest access network feature by using the Netgear app. For instructions, shoot your queries into the comments section.
In a Nutshell
Enabling the Netgear guest access network feature on your WiFi range extender will protect it from anonymous person and also help in improving its performance up top 30%. Just in case, you are still unable to enable the guest access network feature even after following the tips given in this article in exact given order, do let us know.