How to Login to Linksys Smart Wifi Router?

With each Linksys Smart Wi-Fi Router is a free service called Linksys Smart Wi-Fi. By using a Linksys cloud account and connecting your router to it, you can easily access your Linksys router login page, once it has been configured from any location where there is an internet connection.

IMPORTANT: Make sure the router’s firmware is updated to prevent any problems with accessing the router using your Linksys cloud account. To find out how to check your router’s firmware version, click here. Click here to find out how to manually update the firmware on a Linksys Smart Wi-Fi Router.

You can use any of the following methods to access your Linksys Smart Wi-Fi:

• Remote Access
• Local Access

Login through Linksyssmartwifi.com

• Carefully follow the instructions to log in to linksyssmartwifi.com.
• Go to your device’s web browser first. Updated browsers are recommended.
• In the address bar, enter the website address http://www.linksyssmartwifi.com and press Go.
• Following that, the Linksys router login page will appear on the screen.
• You must enter your login information on the Linksys router login page.
• Enter your Linksys router login credentials.
• Click the Linksys router Login button to gain access to your router at last.

Login to Linksys Router through IP address

• First, confirm that your device is linked to the network of the Linksys router.
• Visit the 192.168.l.l Linksys router login page by opening the web browser after that.
• Following that, the Linksys router IP login page will appear.
• You must enter the Linkssy router login username and password on the page.
• Then, enter your login information and click the Login button.
• You have now successfully logged into the Linksys wifi router.

Login through Myrouter.local https://youtu.be/U9sfPISzbcE

Why Linksys Router is not working?

If your Linksys smart wifi router not working, you may having some issues with your device. here are some fixes that you can try to fix:

1. Restart your router and disconnect Linksys’ power cable

• Check the power supply by unplugging your Linksys smart wifi router from the outlet.
• From the router, unplug every cable.
• Make sure the wires are connected properly before plugging them back in.

2. Make available and update the IP addresses

The next step should be taken if, despite rebooting your router, you are still unable to sustain an Internet connection for more than a few minutes. To begin, note that the modem of your ISP is where your router receives its IP address.

Try logging in to the router’s administrative page next, and then let go and re-establish the router’s connection to your modem. On your computers, you can practise the same thing.

the modem, router, and computers should all be turned off after that. To start the ISP modem, wait a moment. The router should be turned on as well once the status lights indicate it is ready. Finally, turn on your computers after a break of 60 seconds.

3. Mirror the computer.

• Follow these steps on your computer. Installation > MAC Address Clone.
• Access the browser-based tool by logging in.
• Tap the Setup tab.
• Choose the MAC Address Clone page.
• Click Enabled after that.
• The 12-digit MAC address of your old router should be entered, or you can click Clone My PC’s MAC.
• Choose Save Settings.
• To determine which MAC matches which IP, a list is kept in any Ethernet network. Your ISPs may have declined to accept the home network due to the power outage.

Because of this, you ought to copy the initial MAC address. Once everything has been rebooted, make sure everything is operating normally.

4. Restore Linksys to their default settings.

The Linksys router’s factory default settings can also be restored. To reset the router, press the Reset button while the Power LED is blinking. To finish the reset process, keep pressing it for 30 seconds.

How to Reset Linksys Router?

If your issues are still there, then you can try the reset it. It will reset your device to the factory defaults. Here is the process, you can follow to reset the Linksys smart wifi router.

• Reset your router if you’re still having problems.
• On your Linksys wifi router, depress and hold the reset button.
• Hold the reset button down for approximately 10 seconds.
• Your router will return to its factory default settings a short while later.

Visit to Setup Linksys RE7000 Extender.