sprüche und wünsche
Featured
Trending

LOCK STUCK, KEY DOES NOT TURN: WHAT TO DO?

If your lock is stuck and the key won’t turn, you’ve come to the right place! It is essential to know the best tips for unlocking your door to avoid emergency repairs. Generally, the cylinder or the lock prevents your front door from opening. We present a straightforward tutorial to open your doors, degrease your locks, and remove your keys!

DEGREASE A DOOR RELEASE LOCK

Your key does not turn. It is undoubtedly a problem with the lock. First, identify the problem. Is this a low-end key? Has your key suffered freezing or expansion due to heat?

Either way, our teams of metalworkers know the best tips for degreasing.

Apply a particular anti-seizing product to your lock. This type of oil is elementary to find, especially in large DIY stores.

Among all products, we strongly recommend the use of natural products.

For example, apply candle wax or soap to your key. Be careful not to use these materials excessively. You risk fattening after having degreased the key try to introduce it in the lock and make it turn.

REMOVING A BROKEN KEY WITH A SHARP INSTRUMENT

A broken key in the lock is a fairly common incident. To solve this kind of problem, we recommend several solutions. First, try to get some lube. It can even be soap to make the lock slide.

Try to remove the key from the cylinder with a pointed instrument. A scissor can do the trick and will act as pliers! Once the tip of the lock is out, continue pushing with the chisel. Also, try to get a screwdriver to make extracting the key easier!

If the key is out of a few millimeters, it is possible to use tweezers or a hooked rod.

Use a magnet to pull the key towards you if you’re really equipped! Then, bring it closer to the lock.

REMOVE A BROKEN KEY WITH A BONDING SYSTEM

  • Cover the end of the remaining key with a bit of glue.
  • Check the orientation of the cylinder before inserting the key. (The deadbolt must be in the initial position)
  • Insert the end of the key into the lock.
  • Wait a few minutes for the two ends to stick together.
  • Slowly remove the key from the cylinder.

CHANGE YOUR LOCK YOURSELF!

Are you faced with a blocked lock, and your key does not turn or does it turn in a vacuum? Then, it’s time to think about a replacement of the lock. Although this task is intended for professionals, it is entirely possible to change the lock yourself.

Beforehand, it would be best if you equipped yourself with:

  • With a screwdriver
  • From the key

For an optimal lock change, follow these steps:

  • Carefully unscrew the handle screws. Then, keep them aside for possible reuse.
  • Insert the key into the cylinder,
  • Turn the key to both sides, gently pulling the cylinder towards you,
  • Replace the damaged cylinder.

CALL A PROFESSIONAL LOCKSMITH!

Sometimes it’s hard to have lock picking tools handy! In this delicate situation, it is essential to have good addresses. Locksmith Tampa is one of Tampa’s most competent locksmith companies. They only train craftsmen who are passionate about their trades.

For your security, do not hesitate to call a reliable locksmith to intervene in the rules of the art.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
fotos de jenni rivera desnuda violet myers chris black a night in paris sex tape
izmir escort
canlı casino siteleri casino siteleri 1xbet girş casino hikaye